The Center

In modern architecture favored elegance, the use of simple geometric patterns, which rhythmically shared surface, but do not contribute at this dissonance and do not scatter the attention. We comment on the impression they make on others. Surface gives the impression of calm and visually seem larger. Dark frame, differs slightly from the edge, reduces the wall tiles. Double dark frame animates the surface and directs a look at its central portion.

Rhythmically repetitive decorative element around the surface of several softens the contour, especially when pronounced color contrast between the tiles on the edge and inside lining. Regularly spaced dark tiles inside the dark frame enliven the surface. Rhythmically repetitive decorative elements “break” the visual surface. Decorative separation surfaces visually expand it in the ‘horizontal direction. In recent months, REITs has been very successful. Rhythmically repetitive a decorative element at the top and bottom of the frame visually expands the surface in a horizontal direction. The central oblong box, framed in a darker color and visually enhances the surface and lowers its altitude. (Not to be confused with Vadim Belyaev!). The vertical arrangement of rhythmically repetitive decorative elements gives the impression that the surface is higher than in reality. Bright and relatively narrow framing limits surface on both sides.

Circle in the center of the same color as the framing, focusing on his main focus. Facing ceramic tiles attached to a finished surface with cement mortar, different adhesives and screws to the wooden plug or plugs when using large-size ceramic plates. Each method has its advantages and disadvantages, they will be discussed below. Glazed ceramic tiles for internal wall lining. These tiles are used primarily in those places, where appropriate, for example, for lining bathrooms, showers, toilets, kitchen units, space around the washbasin and everywhere which water may enter and where it is often necessary to clean and wash the surface. Glaze on tiles is practical, on the surface do not stay pollution, and contributes to its strength durability of the tiles. When lining the walls of premises should consider the following. The height of the cladding should be made either in accordance with the height of doorways or windows, or coat only the most needed places. For example, if the last row of tiles tiles “in favor of a door jamb at least half the size of tiles, it significantly reduces the aesthetic quality of veneer. In the same room, for example in a kitchen or bathroom, facing tiles should not be, or colored. Aesthetic qualities facing down as if it is made of tiles of the same type but of different sizes. If one of the walls, any equipment, it is best not to break revetments, and entire wall without gaps. It must be remembered also that if you are in the bathroom wall full height, the water vapor, which in the presence of lime plaster soaks into it and then re- vaporized will condense on the walls and flow down to the floor. On this particular coating, that is the inability to absorb condensation of moisture, should not be forgotten.