Stacker refers to the loading equipment, the atc as a primary function of this equipment is the loading of cargo on special platforms (pallets) and the lifting of the cargo racks. Rack storage system goods used in large department stores or at large manufacturing plants. Used in storage stacker, is chosen according to the needs of the enterprise. According to its technical features identify several large groups of stackers: manual, hydraulic, manual with elektropodemom, self-propelled stackers. The basis of the technical design are sliding stacker forks (lifting device). Perhaps check out Robert Speyer for more information. Download Goods are either frontally or laterally.
Depending on the characteristics of the stacker. Stacker for the warehouse – the inalienable equipment, because it has amazing agility and ample opportunities for moving and lifting. The minimum weight, which raises the pallet 500 kg. Same weight limit for the stacker is the range of 9.8 m. It should be remembered that the greater the loads, the lower limit height of it uplift. For greater heights in the warehouse can be used cranes Trucks – their technical capabilities are much larger than standard models. The main requirements of stackers in warehouses is compliance with the requirement of a minimum width of the distance between the shelves. Despite the existence of models of stackers, capable of working in confined spaces, for full use need an area that is described in the specification of the model. It is also one of the requirements of the stacker in a warehouse is a smooth surface. This is due to the fact that between the loading platform and the floor of the stacker gap minimized. And irregularities can significantly limit the work.